Termomeccanica G.L., that’s always careful to the requirements of a countinuously evolving market, added to its range of products the POWER THERM, a Spray Booth with an electric turbo-fan directly coupled to the motor. This proves the versatility of Termomeccanica G.L., which continues its research of personalized technological solutions, with the intent to facilitate customer’s choice, according with his requirements. Total painting operations The fan on the thermal unit takes air through ducts connected to the outside. A series of synthetic filters in the antechamber to the thermal unit conduct a preliminary filtering. The flow of air is pushed to the top of the ceiling of the oven by the distribution system and passes through a series of three special layer filters to reach the inside. The air is cleaned to above 99%. The compressed air system generates a constant flow around the vehicle, which removes excess paint. Total drying process The fan is inside the thermo-ventilation unit. It is possible to establish the complete recycling of hot air by closing the intake shutter and opening the butterfly valve at the bottom. The temperature rises to the required level (max 60/80° C). The polymerization and drying of the paint is achieved in a short time. At the end of the drying cycle the burner shuts down automatically. The recycling shutter opens and a s a result the intake opens and air enters and cool the car.
Per visualizzare i contenuti è necessario effettuare il login